Menu
2412T
FLEXI LEXI – 2412T
APPLICATIONS : Commercial | Retail | Residential
- Bendable in horizontal and vertical direction.
- Small cutting increment of 100 mm.
- Maximum 10 meter run for single feed.
- UV prove and Salt-mist prove suitable to use in outdoor or seaside.
- Mounting clip and profile and stainless-steel chain available for installation.
Luminaire Specification
| CCT | 2700 / 3000 / 4000 / 6500 / RGB / RGBW |
| Beam Angle | 115° |
| CRI | 90 |
| SDCM | < 3 |
| Lifetime | 50,000 hrs |
| Control | Phase Cut / 0-10V / DALI / Casambi |
| IP Rating | 67/68 |
| Dimension (mm) | 16 (W) × 17 (H) × 10000 (Max L) |
| Bending Radius (mm) | Min. 100 |
| Finish | White / Black |
| Installation | Clip / Profile Mounted |
| Warranty | 5 years |
Lighting Effect
Accessaries
AL Profile
Flexi Chain
AL Clip
Connector Type
Side A Feeder
End Feeder
End Cap
Bottom Feeder
Side B Feeder
Attention
a. The LED neon itself and all its components may not be mechanical stressed.
b. Please ensure that the power supply is adequate power to operate the total load. Only qualified personnel should be allowed to perform installations.
c. The design of the housing should be according to the IP standards in the application.
d. If surge protection structure not within power supplier, a lightening protector should be needed additionally.
e. Before cutting and making reconnection, please read the user manual, and please ensure you have read and fully understand it.
f. Please do not twist the product and do not bend it in wrong direction.
Luminaire Specification
| CCT | 2700 / 3000 / 4000 / 6500 / RGB / RGBW |
| Beam Angle | 115° |
| CRI | 90 |
| SDCM | < 3 |
| Lifetime | 50,000 hrs |
| Control | Phase Cut / 0-10V / DALI / Casambi |
| IP Rating | 67 / 68 |
| Dimension (mm) | 24 (W) × 12 (H) × 10000 (Max L) |
| Bending Radius (mm) | Min. 120 |
| Finish | White / Black |
| Installation | Clip / Profile Mounted |
| Warranty | 5 years |
Details
Lighting Effect
Accessories
Dimension - AL Profile
Connector Type
Side A Feeder
Side B Feeder
Bottom Feeder
End Feeder
End Cap
Attention
a. The LED neon itself and all its components may not be mechanical stressed.
b. Please ensure that the power supply is adequate power to operate the total load. Only qualified personnel should be allowed to perform installations.
c. The design of the housing should be according to the IP standards in the application.
d. If surge protection structure not within power supplier, a lightening protector should be needed additionally.
e. Before cutting and making reconnection, please read the user manual, and please ensure you have read and fully understand it.
f. Please do not twist the product and do not bend it in wrong direction.